Pneumatic seals
Pneumatic seals operate in compressed air environments and are used in pneumatic cylinders, valves, and actuators. Unlike hydraulic seals, they are designed to function at lower pressures and require minimal lubrication. Bright Star’s pneumatic seals are known for their precision fit, low friction, and long service life in automation and machinery applications. They are ideal for dry environments and offer excellent resistance to ozone, aging, and temperature fluctuations
Polymers:
BRIGHT STAR has successfully developed formulations and rubber components based on the following polymers and has been supplying to diverse industries over
the past few decades.
- FFKM/ Perfluoroelastomer
- FKM / Viton ®
- TFE/P/Aflas ®
- Silicone, Flurosilicone
- Nitrile (NBR), Carboxylated
- NBR (XNBR) / PVC Nitrile
- SBR
- EPDM, EPR
- Chloroprene / Neoprene®
- Natural / PLC / Polyisoprene
- Polyurethane
| MATERIAL | HARDNESS RANGE (SHORE A) | HIGH TEMP °C | LOW TEMP °C | STEAM |
| FFKM | 70-90 | 300 | -10 | E |
| FKM (VITON) | 50-90 | 230 | -20 | F-G |
| AFLAS | 60-90 | 200 | -10 | E |
| NBR | 20-95 | 100 | -30 | F-G |
| HNBR | 50-95 | 150 | -40 | G |
| SBR | 40-90 | 100 | -40 | P |
| EPDM | 40-90 | 150 | -40 | E |
| SILICONE | 20-80 | 200 | -60 | F-G |
| NR | 30-90 | 70 | -50 | P |
| CR | 40-90 | 100 | -40 | F |
Rating
- E = Excellent – Suitable for prolonged exposure to saturated steam at high temperatures
- G = Good – Suitable for moderate steam exposure with some limitations
- F = Fair – Can handle light or intermittent steam but not continuous service
- P = Poor – Degrades quickly in steam; not recommended


