CUSTOMIZED MOULDED GOODS
Customized rubber components are engineered for specific client applications, from sealing to vibration isolation. Bright Star Rubber Corporation specializes in tailored solutions with rapid prototyping, tooling, and material selection. We collaborate with clients across sectors to co-develop components that meet unique design, compliance, and environmental performance standards
Polymers:
BRIGHT STAR has successfully developed formulations and rubber components based on the following polymers and has been supplying to diverse industries over the past few decades.
- FFKM/ Perfluoroelastomer
- FKM / Viton ®
- TFE/P/Aflas ®
- Silicone, Flurosilicone
- Nitrile (NBR), Carboxylated
- NBR (XNBR) / PVC Nitrile
- SBR
- EPDM, EPR
- Chloroprene / Neoprene®
- Natural / PLC / Polyisoprene
- Polyurethane
| MATERIAL | HARDNESS RANGE (SHORE A) | HIGH TEMP °C | LOW TEMP °C | STEAM |
| FFKM | 70-90 | 300 | -10 | E |
| FKM (VITON) | 50-90 | 230 | -20 | F-G |
| AFLAS | 60-90 | 200 | -10 | E |
| NBR | 20-95 | 100 | -30 | F-G |
| HNBR | 50-95 | 150 | -40 | G |
| SBR | 40-90 | 100 | -40 | P |
| EPDM | 40-90 | 150 | -40 | E |
| SILICONE | 20-80 | 200 | -60 | F-G |
| NR | 30-90 | 70 | -50 | P |
| CR | 40-90 | 100 | -40 | F |
Rating
- E = Excellent – Suitable for prolonged exposure to saturated steam at high temperatures
- G = Good – Suitable for moderate steam exposure with some limitations
- F = Fair – Can handle light or intermittent steam but not continuous service
- P = Poor – Degrades quickly in steam; not recommended


